Insignia NS-P2000 Guide De L'utilisateur page 9

Channel separation............................... 50dB
Crossover network
Low pass filter .................................... 45 Hz to 300 Hz
Bass boost ......................................... 0dB to +12dB
High pass filter ................................... 45 Hz to 300 Hz
Fuse rating............................................. 30A × 2
Size L × W × H ....................................... 18.43 × 10.16 × 2.56 inches
Sub-woofer
Woofer size ................................................12 inch diameter
Woofer material .........................................Plating injection-molded
Magnet size................................................82 oz.
Continuous power handling.....................200 W
Peak power handling ................................400 W
Impedance .................................................8 Ohms
Sensitivity ..................................................88.7dB
Voice coil....................................................2-inch Black anodized
Free air resonance frequency Fs.............36 Hz
Frequency response .................................36 Hz-2 KHz
Total Q factor (Qts)....................................0.53
Connection type........................................Screw terminals
Number of voice coils...............................One
Frame material ..........................................Stamped steel
Surround material .....................................Rubber
Dimensions:
Mounting depth ......................................6.02 inches (153 mm)
Total depth .............................................6.69 inches (170 mm)
Overall diameter.....................................12.4 inches (315 mm)
Mounting hole diameter (cutout) ............11.02 inches (280 mm)
Weight ........................................................12.10 lb. (5.5 kg)
Recommended enclosure size ................48.6 L
Other features:
• Insulated 24-gauge tinsel leads
• Linear spider improves mechanical stability under high
excursion and eliminates the need for a subwoofer break-in
period.
www.insignia-products.com
(468 × 258 × 65 mm)
cone with polypropylene
material
aluminum ESV wire
9