Using The Remote Control; Replacing The Battery - Pioneer CD-R33 Mode D'emploi

Before you start
! When disposing of used batteries, comply
with governmental regulations or environmen-
tal public institutions' rules that apply in your
country/area.
Important
! Do not store the remote control in high tem-
peratures or direct sunlight.
! The remote control may not function properly
in direct sunlight.
! Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.

Using the remote control

% Point the remote control in the direc-
tion of the front panel to operate.
When using for the first time, pull out the film
protruding from the tray.

Replacing the battery

1 Slide the tray out on the back of the re-
mote control.
2 Insert the battery with the plus (+) and
minus (–) poles aligned properly.
Specifications
Power source ............................. 3 V DC (Lithium battery;
Dimensions (L × W × H) .... 110 mm × 52 mm × 12 mm
Weight .......................................... 40 g (1.41 oz) (including bat-
Note
Specifications and the design are subject to mod-
ifications without notice.
En
CR2025)
(4-3/8 in. × 2 in. × 1/2 in.)
tery)