Intex 28076 Manuel D'utilisation page 10

LADDER SETUP (continued)
9. AFTER USE OF LADDER (refer to figure 8):
Press
and
Pull
10. Removing the steps from the secured position (refer to figure 9):
a) With your right hand pull and hold the latch towards you, while at the same time
with your left hand press the white protruding buttons and simultaneously lift that
leg out of the cavity exposing the lower white protruding buttons.
b) Allow the leg to rest over the top brace (make sure it does not fall back into the
cavity), and quickly lift up the "removable step assembly" out of its secured
position.
c) See step 6 for re-attaching the removable steps.
1
1
SAVE THESE INSTRUCTIONS
(332IO) 48", 52" LADDER WITH REMOVABLE STEPS ENGLISH SIZE: 7.5" X 10.3" PANTONE 295U 06/07/2017
1
Press
and
Pull
2
1
2
3
2
English
332A
8
9
3
Page 10