Noise/Vibration Information; Technical Data - KRESS 900 HEX/2 Mode D'emploi

English
8
1 Application
The eccentric disc sander is intended for sanding and
polishing wood, plastic and metal materials as well as
painted, flat and rounded surfaces.
Safety Instructions and
2
Accident Prevention
Before operating the machine, please read through
the operating instructions completely, follow the
Safety Instructions in this manual as well as the gen-
eral Safety Instructions for Power Tools in the
accompanying booklet.
Important instructions, which should be read
before starting operation, and which we strongly
recommend observing:
If the mains cable is damaged while working, pull
the mains plug immediately.
Never work with a damaged mains cable.
Wear protective glasses, hearing protection, pro-
tective gloves and sturdy shoes.
The dust that is produced while working is detri-
mental to health. Use dust extraction and wear a
dust mask.
The machine can be used only for dry sanding.
Do not work with materials containing asbestos.
Do not carry the machine by the cable.
The mains receptacles in the working area must
be protected by a residual current circuit breaker
(RC).
Do not drill holes into the housing to label the
machine. The protective insulation will be bridged.
Please use self-adhesive labels.
3

Noise/vibration information

Measured values determined according to
EN 50 144.
Sound pressure level:
Sound power level:
Work place emission value:
For operation, noise protection measures are
required.
The acceleration measured is usually less
2
than 2.5 m/s .
4
Eccentric disc sander
Article number
Input power
Output power
No-load speed
No-load oscillations rate
Backing pad Ø
Eccentric amplitude Ø
Weight
Safety class
5
1 Lugs
2 Spacer
3 Locking grip
4 Screw of curved handle
5 Curved handle
6 Switching ring
7 Locking switch
8 Ventilation slots
9 Latch for mains cable module
10 Speed selection knob
11 Recess
12 Rubber backing pad
13 Rubber head
14 Lock
15 Backing pad carrier plate
16 Sanding sheet
17 Torx screws
18 Rubber seal
Accessories illustrated or described are not always
included as standard delivery items.
78 dB (A)
91 dB (A)
81 dB (A).

Technical Data

Illustration
900 HEX/2
900 HEX/2
06 05 1101
900 W
495 W
2325 – 5500 RPM
4650 – 11000 RPM
150 mm
7 mm
approx. 2.2 kg
II/