PowerVac PV100
2.1
General safety
Before use check that mains voltage coincides with appliance voltage
(see technical specifications plate).
Only use the power source supplied.
Do not use the appliance in the case of visible signs of damage.
Never expose the power supply or the 12 V charge cable to moisture.
Do not charge the device if the charge cable, the power supply or the
charge socket on the device show signs of damage.
Repairs to the appliance should only be carried out by authorised
technicians. Unauthorised repair may cause considerable danger.
Refer to technical service department WAECO in case of repair.
Do not use any accessory that has not been recommended by WAECO.
This may cause material damage or harm.
2.2
Safety when using the appliance
The appliance should never be used on premises where inflammable sub-
stances are kept or where inflammable gases are present. Engine sparks
could ignite the gases.
Do not vacuum
– caustic liquids or liquids containing dissolvents
– hot, burning, hard or sharp objects
– toxic material.
These may damage the appliance or the filter.
Do not immerse appliance in water.
Only use the appliance indoors, never outdoors.
Ensure that openings do not become obstructed. If necessary, clean
openings before using the vacuum cleaner.
Do not use the appliance without the filter in place.
When in use, keep nozzles away from eyes, ears and face. Ensure that
hair, loose clothing, and fingers do not enter openings and are not in con-
tact with rotating parts.
Keep children and animals at a safe distance when appliance is in use.
Safety warnings
21