Monoprice 15276 Mode D'emploi page 5

LED INDICATOR STATES
LED Indication
Red blinking
Red solid
Blue solid
Blue blinking slowly
Blue blinking quickly
Red and Blue blinking alternately
CHARGING
The headphones should be fully charged before first use and should be charged at least
once every three months, even if they are unused during that period of time. Perform the
following steps to charge the headphones.
1. Plug the included Micro USB cable into the Micro USB charging port, then plug the
other end into a USB power source (e.g., computer port, wall charger, battery pack,
etc.). The LED will glow Red while charging is in progress.
2. Once the headphones are fully charged, the LED will change to Blue. Unplug the
Micro USB charging cable from the headphones and from the USB power source.
The battery power level is low. Recharge the battery.
Battery charging is in progress.
Battery charging is complete. Disconnect the Micro
USB charging cable.
The headphones are connected to the Bluetooth®
audio source.
The headphones are not connected to the Bluetooth
audio source.
The headphones are in Bluetooth pairing mode.
Function