Charging The Device - TLS VoiceMarker Blue Mode D'emploi

Battery-powered devices (VoiceMaker Combi Akku)

Charging the device

Battery-operated devices are equipped with an automatic charging function. During the network operation, this
function takes over the charging process of the battery. However, it is possible to continue using the device while
charging it.
The charging process is indicated by the light-emitting diode CHARGE. The current status of the battery capacity
will be indicated via the percentage display. The LOW display indicates an almost empty battery.
Note: Self-discharge. Always switch off the device after use by pressing the POWER button.
Batteries may discharge themselves, by what the service life of the battery would be impaired.
Therefore, charge the device in regular intervals, by connecting it to a 230 V outlet.
Instruction manual
45