Asus RT-AC1200G Mode D'emploi page 10

Connect to the wireless network
There are two ways for your wireless clients (notebook, tablet
PC, smartphone and so on) to connect to RT-AC1200G's wireless
network.
Connect to the wireless network manually
To connect to the wireless network manually:
To connect to the wireless network manually:
1. Enable the Wi-Fi function on your wireless client to scan for
available wireless networks.
2. Select the SSID or network name that you assigned to your RT-
AC1200G's network.
3. Enter the password and click Connect.
Connect to the wireless network through WPS
RT-AC1200G has a WPS (Wi-Fi Protected Setup) button for you to
connect your wireless client to RT-AC1200G's network without
entering password.
To connect to the wireless network through WPS:
1. Press the WPS button at the back of RT-AC1200G. Refer to the
section A quick look for the location of the WPS button).
2. Press the WPS button of your wireless client within two min-
utes or follow the WPS instructions that came with the wireless
client. When connecting via WPS, the WPS LED on your router
blinks fast.
3. Wait until your router's WPS LED turns into a solid light indicat-
ing a successfully connection between your router and your
wireless client.
10
na10332_rt-ac1200g_qsg.indb 10 2015/6/8 11:50:53