Overview - CALPAK FlowSol S Installation

F lo w S o l S
1

Overview

• Pre-assembled pump station
• Integrated controller from the
C series
D e lt a S o l ®
• Safety assembly with connection for the
expansion vessel, safety valve and pressure
gauge
• Fill and drain valves
• Wall mounting bracket and mounting
material
• Design insulation
• Standard or high-efficiency pump
Technical data
Dimensions (H x W x D):
approx. 430 x 223 x 193 mm (incl. insulation)
Circulating pump:
WILO Star ST15/6 or ST15/7
Nominal size: DN 15
Connection to expansion vessel:
3/4" ET, flat sealing
Outlet safety valve: 3/4" IT
Connections to the solar pipes: 3/4" IT
Safety valve: max. 6 bar
Pressure gauge: 0 ... 10 bar
Non-return valve: Opening pressure 20 mbar,
openable
Admissible max. temperature: +120 °C
Medium: Water with max. 50 % propylene glycol
Material:
Fittings: brass
Seals: EPDM/AFM 34
Insulation: EPP foam
Flowmeter: 1 ... 10 l/min
3