Set Up And How To Use; Product Description; Setup; Important - Hoover WH10600 Guide D'utilisation

PRoduCt desCRiPtion

1.1
3
2
1
bACK/FRONT
1. Rear Grille
2. Rinsable Pre-Filter
3. Replacement filter made
with HEPA Media
4. TiO Coated Screen
2
5. UV Bulb
*Setting the unit on AUTO mode (A) will allow the unit to run at the most effective speed based on readings
from the air quality monitor. As air conditions change, the air purifier will change its fan speed setting
accordingly. This reading will be clearly represented by a change in the background color of the LCD
screen. Blue = Good air quality, Amber = Fair air quality, Red =Poor air quality. For proper function, ensure
that there is adequate airflow around the product.
set-uP
- Remove the air purifier from its packaging.

IMPORTANT

Place the unit on a flat, stable surface with
adequate ventilation.
- Plug the unit into an AC outlet.
- Press the POWER button.
- Adjust the Air Cleaning Power with the "+" and "-"
buttons. The unit has three Air Cleaning Power
settings, and an Auto Mode.
- Press the "UV/TiO
The curved light at the front of the unit will
illuminate when the UV/TiO
activated.
- Press the "ION" button to toggle on/off. The
button will illuminate with an amber light when
the ION mode has been activated.
- Press the TIMER button to set the timer to 1 to
24 hours/OFF (hours indicated with LCD
display).
1. set-uP & HoW to use
bACK
4
5
CONTROL PANEL
6. UV Bulb/ TiO
7. Ionizer
8. 1 to 24 Hour Timer
9. 3 Speed Control with Auto
10. LCD Display
11. Filter Reset
" button to toggle on/off.
2
mode has been
2
FRONT
8
10
6
LCD DISPLAy ICON
a. IONIZER on
Coated Screen
2
b. UV/TiO
c. Filter made with HEPA Media
d. Timer (Time Left)
e. Running Fan Speed/
5
CONTROL PANEL
7
on
2
Replacement Indicator
TM
IntelliSense Control System*
("A" for Auto Mode)
11
9
a
b
c
d
e