CONTROL PANEL
Symbol
Explanation
Ice-cream making mode
Mixing mode
Cooling mode
Button START/STOP
Power switch button
Menu button
BUTTON FUNCTIONS
Power switch button
Plug in the plug and press the power switch for
one second to start the ice-cream maker. The
status light for ice-cream making mode flashes
red. Press the power switch button again for
one second to switch off the ice-cream maker.
Button START/STOP
The status light flashes red when the ice-cream
maker starts. Press the button START/STOP.
The status light goes green and the product
starts working. Press the button START/STOP
again to stop the ice-cream maker. The status
light flashes red and the ice-cream maker stops
working. The cooling mode is not activated in
run mode and in ice-cream making mode. If the
button is pressed again in this mode the status
light flashes red, the mixer stops, and cooling
function is deactivated after one minute. If the
button is pressed again within one minute the
ice-cream maker returns to run mode.
Menu button
Press this button when the status light is red, to
select one of the three modes. It is not possible
to select mode with the menu button when the
status light is red.
3 MODES TO CHOOSE BETWEEN
1
Mixing mode
The mixer starts when this mode is
activated. The time set at the factory
is 30 minutes. Ten audio prompts are
given to indicate that the mixing is
finished when the set time has run out
or the mixture of ice cream has reached
the set consistency. The ice-cream maker
goes into standby mode and the status
light flashes red. Select another mode,
or switch off the ice-cream maker.
2
Cooling mode
The compressor and cooling fan
start. The time set at the factory is
ten minutes. Ten audio prompts are
given when the set time has run out
to indicate that the cooling mode has
finished. The ice-cream maker goes
into standby mode and the status light
flashes red. Select another mode, or
switch off the ice-cream maker.
3
Ice-cream making mode
The compressor, mixer and cooling fan
start. Ten short audio prompts are given
when the ice cream is ready. The ice
cream is ready to eat. Cooling mode is
activated automatically and the status
light flashes green if no other steps
are taken. Ten short audio prompts
are given when the cooling mode has
finished. The ice-cream maker goes
into standby mode and the status light
flashes red. Select another mode,
or switch off the ice-cream maker.
EN
29