Maintaining Flail Blades; Rotating Rotor End To End; Replacing Blade Sets - benza BZS38 Manuel De L'utilisateur

Before performing any service and maintenance procedures, consult these general safety procedures for a saf e working
environment .
1 . Make sure that both the engine and Scarifier are cool prior to any service or maintenance work .
2 . Verify that work area is clean and free of any debris, tripping or fire hazards, and other potential sources of danger .
3 . Always wear proper safety clothing and equipment for the job . These can and should include eye and ear protection,
gloves, dust mask and any other items that are appropriat e for the job and work site requirements .
4 . Ensure that the technician has tied back or remove any loose hair, clothing and an y other potential hazards and
obstructions .
5 . Disconnect spark plug .
Use BENZA brand-name parts for compatibility and optimum performance . Use of any other parts prior to
consulting with your local authorized dealer will void all warranties expressed herein .

1. Maintaining Flail Blades

Flails are a normal wear and tear item . There are two procedures that apply to the maintenance of flails:
a . If the striking edge of the flails are dulled by use (see diagram 2), rotate the rotor end to end for fresh blades .
b . Replacing the flails when the y have reached the wear lim its on diagram 2 .
Please contact your local dealer for details
104 I
Operator's Manual