KEUCO Plan 07896 171550 Mode D'emploi page 3

US
Read all instructions before using or installing this product.
Technical data
– Supply voltage:
– Required electrical outlet:
– Max. power consumption:
Prod. No.:
07896 171550 19-11/16" 20.94 lb 27 W
07896 172050 25-19/32" 25.13 lb 30 W
07896 172550
07896 173050
07896 173550
– Degree of protection:
– Ambient conditions:
Operating temperature
Storage temperature
– Luminous color
Mounting dimensions, see page 10.
Installation, see fi gure 1 onwards on page 11.
Before installation check whether the fastening mate-
rials included are suitable for the anchoring base. The
fastening materials are suitable exclusively for stud walls
with timber constructions or for drywall constructions with
timber wood reinforcement.
• Mark the wall bracket position, see fi gure 1.
• Mount the wall brackets to the wall, see fi gure 2.
• Mount the light mirror fi xation, see fi gure 3.
WARNING - GROUNDING
INSTRUCTIONS
This product must be connected to a grounded me-
tal, permanent wiring system, or an equiment-groun-
ding conductor must be run with the circuit con-
ductors and connected to the equipment-grounding
terminal or lead on the product.
120 V AC / 50/60 Hz
15 A / 1800 VA
Width Weight Light
31-1/2" 29.32 lb 33 W
39-3/8" 35.05 lb 42 W
47-1/4" 40.57 lb 48 W
NEMA 1
32° – 113° F
-40° – 158° F
2700 – 6500 Kelvin
Wiring diagram, see fi gure 4 on page 12.
The mirror can be optionally actuated similar to
a toggle switch with a button on the mirror (A) or
with an external light switch (B).
Heat-
ing
26 W
41 W
52 W
65 W
82 W
• Connect the light mirror to the power supply,
see fi gure 5a/5b.
• Remove the adhesive cover from the light mirror
fi xation, see fi gure 6.
• Hang the light mirror on the wall from above,
see fi gure 7 on page 13.
• Press the light mirror to the light mirror fi xation,
see fi gure 8.
Operation
Button functions
Button Function
Light on/off
• Pressing the button switches the light mirror
on with the selected settings. The white LED
goes off.
• Pressing the button again switches the light
mirror off. The white LED lights up.
• The white LED can be deactivated.
– Switch on the light mirror.
– Press and hold the button for 15 seconds.
- The lighting gets lighter or darker.
- The lighting switches off briefl y and the
white LED is deactivated.
To switch the white LED back on, repeat the
described procedure.
Front and wall lighting
• The front and wall lighting is switched on
by pressing the button when light mirror is
switched on.
• Pressing the button again switches the light
off.
B
A
3