Customizing Tv Settings; Initial Setup - Seiki SE43FK Manuel De L'utilisateur

CUSTOMIZING TV SETTINGS

Initial Setup

Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator will illuminate.
In Standby Mode, press the
turn the TV on. The red LED indicator will turn blue.
The first time you turn the TV on, it will go into the Setup Wizard. Press
buttons to select your desired mode and press OK to con rm.
Home Mode : The picture mode will be Standard if you select this mode.
Retail Mode : Select Dynamic Mode if you would like your picture to be brighter. At
times this mode may use more energy to operate the Volume/Sound Mode and
Picture Mode.
The SLEEP-MODE Power should be less than 0.5W.
-
10
En
button on the main unit or on the remote control to
OK :Next OK :Next
Component/AV
HDMI1
HDMI2
HDMI3
USB