Page 2
USER MANUAL MANUEL D UTILISATION ’ MANUAL D EL USUARIO SE43FK Read the User Manual carefully before using the TV and keep it for further reference. Avant d tiliser le t ’u élé ivseur, lisez attentivement le manuel d tilisation et conservez-le ’u...
CONTENTS Important Safety Instructions Safety Information Preparation What's Included Front View Rear View Installing the Base Stand Removing the Stand for Wall-Mounting Remote Control Connecting External Devices Customizing TV Settings Initial Setup Navigating the On-screen Display Selecting Input Source Picture Settings Audio Settings Time Settings Setup Settings...
IMPORTANT SAFETY INSTRUCTIONS Refer all servicing to qualified service personnel. Read these instructions – All the safety Servicing is required when the apparatus has been and operating instructions should be read damaged in any way, such as the power-supply cord before this product is operated.
SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below. Electrical Safety The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product.
PREPARATION What's Included TV Set Remote Control with Batteries TV Stand Four Screws(M4x15) Quick User Manual Start Guide User Manual Quick Start Guide...
PREPARATION Front View 1. VOL +/- Press to adjust the volume. 2. CH / Press to select a channel. 3. MENU Display the OSD (on screen display) menu. 4. SOURCE Press to select among different input signal sources. 5. POWER Switch the TV between On and Standby mode.
PREPARATION Rear View 1. Power Cord 8. RF Input Connect to AC power outlet. Connect to the antenna (75 VHF/UHF) 2. Headphone Socket socket with the RF coaxial cable. Connect to the Headphones. 9. USB Port 3. OPTICAL Output Connect to a USB storage device to play Connect a digital sound system to this photo les.
PREPARATION Installing the Base Stand 1. Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching. 2.Fix the Stand assembly to the main unit using the 4pcs(M4x15) provided screws. Removing the Stand for Wall-Mounting 1.Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching.
PREPARATION Remote Control : Switch the TV between on and standby mode : Mute and restore your TV sound 3. 0~9: Select a program (ATV/DTV mode) 4. —: Enter multiple program channel number such as 2-1 : Return to previous viewing channel 6.
CUSTOMIZING TV SETTINGS Initial Setup Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. In Standby Mode, press the button on the main unit or on the remote control to turn the TV on.
CUSTOMIZING TV SETTINGS OK :Next OK :Next OK :Next If channels can not be found, this frame will be displayed automatically. Navigating the On-screen Display Press the MENU button to display the main menu. buttons to navigate and select the available menus. Pacific...
CUSTOMIZING TV SETTINGS Selecting Input Source Press the SOURCE button on the main unit or on the remote control to Component/AV display the Input Source list. HDMI1 Press buttons to select your HDMI2 desired input source among: TV/ HDMI3 C o m p o n e n t / AV / H D M I 1 / H M D I 2 / HDMI3/VGA/USB and then press OK button to con rm.
CUSTOMIZING TV SETTINGS Audio Settings Press the MENU button on the main unit or on the remote control and then press buttons to select AUDIO menu. Press buttons to select the following audio options and then press the button to adjust each option’s setting.
CUSTOMIZING TV SETTINGS Time Settings Press the MENU button on the main unit or on the remote control and then press buttons to select TIME menu. Press buttons to select the following time options and then press button to adjust each option’s setting.
CUSTOMIZING TV SETTINGS Setup Settings Press the MENU button on the main unit or on the remote control and then press buttons to select SETUP menu. Press buttons to select the following setup options and then press the button to adjust each option’s setting.
CUSTOMIZING TV SETTINGS Lock Settings Press the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. Press buttons to select the following options and then press the buttons to adjust each option’s...
CUSTOMIZING TV SETTINGS Channel Settings Press the MENU button on the main unit or on the remote control and then press buttons to select CHANNEL menu. Press buttons to select the following channel options and then press the button to adjust each option’s setting.
Viewing Photos Picture Press the SOURCE button on the main unit or on the remote control then press the buttons to select the USB mode and then press OK button. Press the buttons to select PHOTO and then press OK button. Note: File format supported: PEG.
PARENTAL CONTROL Press the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV.
Page 22
PARENTAL CONTROL Motion Picture Association of America (MPAA) Rating System Grade Meaning General Audiences Content not offensive to most viewers. Parental Guidance Content is such that parents may not want their Suggested children to view the program. Program is inappropriate for preteens, with a greater Parents Strongly PG-13 degree of offensive material suggested than a PG...
TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or Blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support. The TV does not operate properly The TV does not respond The TV may freeze up during use.
TROUBLESHOOTING The audio function does not work Press the VOL +/- buttons. Sound muted? Press the MUTE button. Picture OK but no sound Try another channel. The problem may be caused by the broadcaster. No output from one of the Adjust the Balance settings in the AUDIO menu.
SPECIFICATION Panel Size 42.5 inch diagonally Display Type DLED Panel Technology Panel 60 Hz Vs. 120 Hz 60Hz Display Resolution 1080P HDMI Support Up to 1080P Panel Resolution 1920 x 1080 Aspect Ratio 16:9 Dynamic Contrast Ratio-Panel 1000:1 Brightness (Centre Typ.) Cd/M² Response Time (G To G) 8 ms Lamp Life (Typ.
Page 26
PARTS : For a period of one (1) year from the date of original consumer purchase, SEIKI will supply, at no charge to the original consumer, new, rebuilt or refurbished replacement parts in exchange for defective parts. After the one (1) year Warranty period, you must pay for the costs of all parts.
Page 27
CONTENU Consignes de sécurité importantes Renseignements sur la sécurité Préparation Éléments compris Vue avant Vue arrière Installation du socle Retrait du socle en vue d’un montage mural Télécommande Connexion des appareils externes Personnalisation des paramètres du téléviseur Con guration initiale Navigation à...
CONSIGNES DE SÉCURITÉ IMPORTANTES Lisez ces consignes – Avant d’utiliser ce produit, Veuillez installer l’appareil à un endroit bien aéré. vous devez lire toutes les consignes liées à la sécurité MISE EN GARDE : pour réduire les risques d’incendie et au fonctionnement de l’appareil. et de choc électrique, n’exposez pas cet appareil à...
RENSEIGNEMENTS SUR LA SÉCURITÉ Pour vous assurer du fonctionnement able et sécuritaire de cet équipement, veuillez lire avec attention les consignes de ce guide d’utilisation, et plus particulièrement les renseignements ci-dessous portant sur la sécurité. Sécurité électrique Le téléviseur ne doit être raccordé qu’à l’alimentation principale, à une tension correspondant à celle indiquée sur l’étiquette à...
PRÉPARATION Éléments compris Poste de télévision Télécommande et piles TV du socle Quatre vis(M4x15) Quick User Manual Start Guide Guide de démarrage rapide Manuel d’utilisation...
PRÉPARATION Vue avant 1. VOL +/- Appuyez sur cette touche pour régler le volume. 2. CH / Appuyez sur cette touche pour choisir un canal. 3. MENU Pour af cher le menu OSD . 4. SOURCE Appuyez sur cette touche pour choisir la source du signal d’entrée. 5.
PRÉPARATION Vue arrière 1. Cordon d’alimentation 8. Entrée RF Se branche dans une prise de courant Se raccorde à la prise de l’antenne (75 c.a. VHF/UHF) à l’aide du câble coaxial RF. 2. Prise pour écouteurs 9. Port USB Se raccorde aux écouteurs. Se raccorde à...
PRÉPARATION Installation du socle 1. Couchez le téléviseur face vers le bas sur une surface plate et coussinée pour éviter de l’endommager ou de rayer l’écran. 2. Fixer le socle au téléviseur à l'aide des 4 pièces(M4x15) fournies vis. Retrait du socle en vue d’un montage mural 1.
PRÉPARATION Télécommande : Pour basculer le téléviseur entre les modes Sous tension et Veille. : Pour activer ou désactiver le son du téléviseur. 0~9: Pour sélectionner un canal. (Mode ATV/ DTV) —: Pour entrer plusieurs numéros de canal, par exemple 2-1. : Pour revenir au canal précédent.
PERSONNALISATION DES PARAMÈTRES DU TÉLÉVISEUR PERSONNALISATION DES PARAMÈTRES DU TÉLÉVISEUR Con guration initiale Une fois toutes les connexions physiques établies, branchez le cordon d’alimentation dans la prise de courant. À cette étape, le téléviseur passera en mode Veille et le témoin DEL rouge s’allumera.
PERSONNALISATION DES PARAMÈTRES DU TÉLÉVISEUR OK :Next OK :Next OK :Next S’il est impossible de trouver des canaux, cette fenêtre s’af che automatiquement. Navigation à l’écran Appuyez sur la touche MENU pour af cher le menu principal. Utilisez les touches pour parcourir les menus offerts et faire des sélections.
PERSONNALISATION DES PARAMÈTRES DU TÉLÉVISEUR Sélection d’une source d’entrée Appuyez sur la touche SOURCE de l’appareil principal ou de la télécommande pour af cher la liste des sources d’entrées. Component/AV Appuyez sur les touches pour HDMI1 sélectionner la source souhaitée parmi :TV/ HDMI2 Component/AV /HDMI1/HDMI2/HDMI3/ HDMI3...
PERSONNALISATION DES PARAMÈTRES DU TÉLÉVISEUR Paramètres audio Appuyez sur la touche MENU de l’appareil principal ou de la télécommande, puis sur les touches pour sélectionner le menu AUDIO. Appuyez sur les t ouchs pour sélectionner les options audio, puis sur la touches pour régler les paramètres de chaque option.
PERSONNALISATION DES PARAMÈTRES DU TÉLÉVISEUR Paramètres d’heure Appuyez sur la touche MENU de l’appareil principal ou de la télécommande, puis sur les touches pour sélectionner le menu HEURE. Appuyez sur les touches spour sélectionner les options d’heure suivantes, puis sur la touches pour régler les paramètres de chaque option.
PERSONNALISATION DES PARAMÈTRES DU TÉLÉVISEUR Paramètres de con guration Appuyez sur la touche MENU de l’appareil principal ou de la télécommande, puis sur les touche spour sélectionner le menu CONFIGURATION. A p p u y e z s u r l e s t o u c h e s pour sélec tionner les options de configuration suivantes, puis sur la touches...
PERSONNALISATION DES PARAMÈTRES DU TÉLÉVISEUR Paramètres de verrouillage Appuyez sur la touche MENU de l’appareil principal ou de la télécommande, puis sur les touches pour sélectionner le menu VERROUILLAGE . Utilisez les touches 0 à 9 pour entrer le mot de passe à...
PERSONNALISATION DES PARAMÈTRES DU TÉLÉVISEUR Paramètres de canal Appuyez sur la touche MENU de l’appareil principal ou de la télécommande, puis sur les touches pour sélectionner le menu CANAL. Appuyez sur les touches pour sélectionner les options de canal suivantes, puis sur la touche pour régler les paramètres de chaque option.
Multimédia – Mode USB Visionnement de photos Appuyez sur la touche SOURCE d e l ’ a p p a r e i l p r i n c i p a l o u d e l a Picture télécommande, puis sur les touches p o u r s é...
CONTRÔLE PARENTAL Appuyez sur la touche MENU de l’appareil principal ou de la télécommande, puis sur les touches pour sélectionner le menu LOCK (VERROU). Utilisez les touches 0 à 9 pour entrer le mot de passe à 4 chiffres qui vous permettra d’ouvrir le menu LOCK (VERROU). Si vous utilisez cette fonction, vous pouvez «...
Page 46
CONTRÔLE PARENTAL Système de classement de la MPAA (Motion Picture Association of America) Description Signi cation Grand public Le contenu n’offensera pas la majorité des téléspectateurs. Surveillance parentale Les parents pourraient vouloir empêcher leurs enfants de recommandée regarder l’émission en raison de son contenu. L’émission est inappropriée pour les préadolescents;...
Dépannage Si votre téléviseur ne fonctionne pas normalement ou si vous n’arrivez pas à l’allumer, veuillez véri er les éléments de dépannage suivants. Pour identi er le problème, pensez aussi à véri er tous les autres appareils électroniques connectés, par exemple le lecteur de DVD ou le lecteur Blu-ray.
DÉPANNAGE La fonction audio est inopérante Appuyez sur les touches VOL +/-. L’image est bonne, mais il n’y Le son est-il désactivé? Appuyez sur la touche MUTE. a pas de son Essayez de changer de chaîne. Le problème provient peut-être du télédiffuseur.
Caractéristiques technique Taille de l’écran 42.5 pouces en diagonales Type d’af chage DLED Technologie de l’écran Écran 60 Hz ou 120 Hz 60Hz Résolution d’af chage 1080P Soutien HDMI jusqu'à 1080P Résolution de l’écran 1920 x 1080 Format de l’image 16:9 Ratio de contraste dynamique de l’écran 1000:1...
SEIKI LLC(SEIKI) à l’acheteur initial contre tout défaut de fabrication (« garantie ») selon les termes suivants : REMPLACEMENT : Pendant une période d’un (1) an à compter de la date de l’achat initial, si SEIKI ou l’un de ses fournisseur de services autorisé...
Page 51
CONTENIDO Instrucciones de seguridad importantes Información de seguridad Preparación Qué se incluye Vista frontal Vista posterior Instalación del soporte de la base Extracción del soporte para el montaje en la pared Control remoto Conexión de dispositivos externos Personalizar la con guración del televisor Con guración inicial Navegación por la visualización en pantalla Selección de la fuente de entrada...
INSTRUCCIONES DE SEGURIDAD IMPORTANTES Lea estas instrucciones – todas las instrucciones Mantenga la unidad en un ambiente bien ventilado. de seguridad y sobre el funcionamiento se deben leer antes de utilizar este producto. ADVERTENCIA: Para reducir el riesgo de incendio o Guarde estas instrucciones –...
INFORMACIÓN DE SEGURIDAD Para garantizar que este equipo tenga un funcionamiento con able y seguro, lea cuidadosamente todas las instrucciones de esta gu a del usuario, especialmente la siguiente información de seguridad Seguridad eléctrica El televisor sólo se debe conectar a una fuente de alimentación principal con el voltaje que coincida con la etiqueta en la parte trasera del producto.
PREPARACIÓN Qué se incluye Televisor Control remoto con pilas soporte de la TV Cuatro tornillos(M4x15) Quick User Manual Start Guide Manual del usuario Gu a de inicio r pido...
PREPARACIÓN Vista frontal 1. VOL +/- Presione para ajustar el volumen. 2. CH Presiones para seleccionar un canal. 3. MEN Visualice el men OSD . 4. FUENTE Presione para seleccionar entre las diferentes fuentes de se al de entrada. 5. ENCENDIDO Encienda el televisor entre modo Encendido y de espera.
PREPARACIÓN Vista posterior 7. Entrada de AUDIO de PC 1. Cable de alimentación Conecte a una salida de audio de la Conecte a la toma de alimentación de computadora. corriente alterna (CA). 8. Entrada RF 2. Toma de auriculares Conecte a la toma (75 VHF/UHF) Conecte los auriculares.
PREPARACIÓN Instalación del soporte de la base 1.Coloque el televisor boca abajo sobre una super cie lisa y acolchonada para evitar que se da e o raye. 2.Fije el ensamblaje del soporte al televisor mediante los 4 tornillos (M4x15) proporcionados. Removing the Stand for Wall-Mounting 1.Coloque el televisor boca abajo sobre una super cie lisa y...
PREPARACIÓN Control remoto : Encienda el televisor entre modo encendido y de espera Silenciar y restaurar el sonido del televisor 3. 0~9: Seleccione un programa. (modo ATV/ DTV) 4. —: Ingrese el n mero de canal de programas m ltiples tales como 2-1 Regrese al canal de visualización 6.
PERSONALIZAR LA CONFIGURACIÓN DEL TELEVISOR Con guración inicial Conecte el cable de alimentación a la toma de corriente después de haber completado todas las conexiones f sicas. En esta etapa, el televisor pasar al modo de espera y el indicador LED rojo se iluminar . En el modo de espera, presione el botón de la unidad principal o en el control remoto para encender el televisor.
Page 61
PERSONALIZAR LA CONFIGURACIÓN DEL TELEVISOR OK :Next OK :Next OK :Next Si no se pueden encontrar los canales, este automáticamente. marco se mostrará Navegación por la On-screen Display Pulse el botón MENU para visualizar el men principal. Utilizar los botones para navegar y seleccionar los men s disponibles.
PERSONALIZAR LA CONFIGURACIÓN DEL TELEVISOR Selección de la fuente de entrada Presione el botón SOURCE en la unidad principal o en el control remoto para visualizar la lista de fuentes de Component/AV entrada. HDMI1 Presione los botones para HDMI2 HDMI3 seleccionar la fuente de entrada que desea entre: TV/Component/AV/ H D MI 1/H D MI 2/H D MI 3/V GA /U S B...
PERSONALIZAR LA CONFIGURACIÓN DEL TELEVISOR Con guración de audio Presione el botón MENU en la unidad principal o en el control remoto y luego presione los botones para seleccionar el men de AUDIO. Presione los botones para seleccionar las siguientes opciones de audio y luego presione el botón para ajustar cada con guración de la opción.
PERSONALIZAR LA CONFIGURACIÓN DEL TELEVISOR Con guración de la hora Presione el botón MENU en la unidad principal o en el control remoto y luego presione los botones para seleccionar el men de TIEMPO. Presione los botones para seleccionar las siguientes opciones de tiempo y luego presioneel botón para ajustar cada con guración de la opción.
Page 65
PERSONALIZAR LA CONFIGURACIÓN DEL TELEVISOR Con guración P r e s i o n e e l b o t ó n M E N U e n l a unidad principal o en el control remoto y luego presione os botones para seleccionar el men CONFIGURACIÓN.
PERSONALIZAR LA CONFIGURACIÓN DEL TELEVISOR Con guración de bloqueo Presione el botón MENU en la unidad principal o en el control remoto y luego presione los botones para seleccionar el men de BLOQUEO. Use los botones 0-9 para introducir la contrase a de 4 d gitos para ingresar al men de BLOQUEO.
PERSONALIZAR LA CONFIGURACIÓN DEL TELEVISOR A ustes del canal Presione el botón MENU en la unidad principal o en el control remoto y luego presione los botones para seleccionar el men del CANAL. Presione los botones para seleccionar las siguientes opciones de canales y luego presione el botón para ajustar cada con guración de la opción.
MULTIMEDIA USB Ver imágenes Presione el botón SOURCE en la uni- dad principal o en el control remoto, Picture luego presione los botones para seleccionar el modo USB y luego pre- sione el botón OK . P r e s i o n e l o s b o t o n e s p a r a seleccionar PHOTO y luego presione el botón OK.
CONTROL PARENTAL Presione el botón MEN en la unidad principal o en el control remotoy luego presione botones para seleccionar el men de BLOQUEO. Use los botones 0-9 Para introducir la contrase a de 4 d gitos para ingresar al men de BLOQUEO. Si se utiliza, esta caracter stica de opción puede "bloquear'' la programación no deseada que aparezca en el televisor.
Page 70
CONTROL PARENTAL Sistema de Clasi cación de la Asociación Cinematográ ca de los Estados Unidos (MPAA) Catego Signi cado El contenido no ofensivo para la mayor a de los P blico general espectadores. Gu a de los padres El contenido es tal que los padres no quieren que Sugerido sus hijos vean el programa.
SOLUCIÓN DE PROBLEMAS Si el televisor no funciona normalmente o no se puede encender, por favor revise las siguientes preguntas de solución de problemas. Recuerde también comprobar cualquier otro dispositivo electrónico conectado, como reproductor de DVD o Blu- ray para identi car el problema. Si el televisor sigue sin funcionar con normalidad, póngase en contacto con el soporte técnico.
SOLUCIÓN DE PROBLEMAS La función de audio no funciona Presione los botones VOL +/-. La imagen est bien pero Se silencia el sonido? Presione el botón MUTE (Silencio). no hay sonido Intente con otro canal. El problema puede ser causado por la emisora.
Page 73
ESPECIFICACION Tamaño de la pantalla 42.5 pulgadas en diagonal Tipo de pantalla DLED Tecnolog a del panel Panel 60 Hz Vs. 120 Hz 60Hz Resolución de la pantalla 1080P Soporte HDMI Hasta 1080P Resolución del panel 1920 x 1080 Proporción de la pantalla 16:9 Proporción de contraste din mico del panel 1000:1...
GASTOS DE ENVÍO : No obstante lo anterior, el consumidor original se hace responsable de los gastos de envío incurridos para enviar el Producto o las partes a SEIKI o a un proveedor de servicios autorizado del cliente de SEIKI, para el diagnóstico, reparación o reemplazo.