Roller Grill BAR 1000 Notice D'installation Et D'utilisation page 14

- A distance of minimum 10 cm with the partition or the wall is necessary.
- Remove the protective films
b) First starting:
During the first use, warm your machine up outside to evacuate residual smokes of
manufacturing oil from the metallic parts. This may emit a slight smell for a few mo-
ments.
First cleaning
Clean the device before the first use. (See 6. Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
- Check that neither the cord nor the plug are damaged. If necessary, it has to be
replaced by the manufacturer, its after sale service or any qualified person to avoid
any risk.
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a plug connected with
the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Commutator 4 positions
(n° 1 on picture) :
Position 1
Position 2
Position 3
Position 4
Orange pilot light (n°2 on
picture)
Timer 15 min (n°3 on pic-
ture)
Function
Stop
Bottom quartz tubes only
Top quartz tubes only
All the tubes warm
Machine is on
Cooking time
14