Preparing Audiorock For Installation - Ebode AUDIOROCK Manuel De L'utilisateur

Preparing AudioRock for Installation

Please charge your battery for your rock by plugging
in the power supply and inserting the battery into the
charger. Allow at least 8 hours for the first charge.
NOTE: Leaving the battery in the charger for periods
longer than 24 hours may reduce battery life. When an
uncharged battery is placed in the charger the LED on
the front of the charger will shine RED; when charging is
complete the LED will turn GREEN.
Charging the AudioRock Battery
Step 1: Plug adapter into the charger.
Step 2: Plug adapter into AC socket.
Step 3: Slide battery into the charger making sure that it
is inserted correctly and that you do not have to force the
battery into the charger.
Step 4: When the battery is fully charged the LED on the
front of the charger will turn GREEN.
Step 5: Remove Battery from charger and place it into
the AudioRock.
10