Table des Matières
Publicité
Important
We thank you for the confidence and support that have you placed in our
company and our products and congratulate you to your choice.
The digital protractor 3-Axle-Inclinometer is a measuring tool that can be
handled easily and safely.
Take good care of this measurement instrument.
•
Read the manual carefully before using the inclinometer
•
Ensure that the inclinometer has not been damaged during transport.
•
Store the inclinometer in a dry and dust-free place.
•
Recycle used batteries.
•
The inclinometer is tested, calibrated and ready for immediate use.
Recommended inspection interval – every 2 years
Please see the calibration certificate of the manufacturer enclosed.
Feature Overview
Use of Inclinometer
The digital protractor 3-Axle-Inclinometer is designed to measure angles.
It enables you to determine the inclination of the suspension arm or of the axle drive
shaft to the horizontal.
Measured data can be put in the electronic wheel alignment machine. Thus camber,
caster /KPI and the max. turn
It allows to measure angles on a vertical and horizontal surface.
Specifications
Power:
Charging rate in use
Closed current (inclinometer switched off)
Operating time with one set of batteries
Specified measuring range
Extended measuring range
Accuracy of the specified measuring range
Resolution
Temperature
Shock stability of the sensors
Electronic Inclinometer
(max. steering angle)
can be adjusted.
6 V (4 x batteries Mignon AA)
10 mA (without lighting)
60 mA (with lighting)
< 10 µA
Without lighting: approx. 50-60 hours
With lighting: approx. 30 hours
+/- 45° for both axles
+/- 90° for both axles
0 ... 10°: +/-0° 03'
10 ... 45°: +/-0° 12'
0° 01'
-5 to +50 °C (operating)
-20 to 65 °C (storage)
3.500g
Manual
4
Publicité
Table des Matières
