ITS EKSEKANS MD HD EASY PLUS Mode D'emploi page 7

PSU connected
Detected HDMI source
Press / to access the menu options
•
Press + /
•
ch  set the output channel [5...12 + 21...69]
•
At  set the desired attenuation [0...15dB]
•
id  modify the Program Id
•
ir  modify IR (infrared) carrier [38 / 46 / 56 KHz]
•
Press while connecting the power supply Factory default values.
•
"rs" will appear on the display.
For advanced settings, download the SW "
•
www.ekselansbyits.com and connect the modulator to the computer by using a
Type A / Type B USB cable.
Note: In case of using more than one modulator for the same receiver or TV set, it
•
is necessary to modify the "Program ID" so that they have different values.
to:
EK_MDHDSoft
EN
" from the website: