Enerpac SQD-I Série Guide D'instructions page 4

torque wrench unit moving rapidly away from
the torquing point causing potential injury to
the operator.
5
5
CAUTION: The torque wrench must be
properly positioned manually to make sure the
reaction force is safely transmitted via the
reaction arm and not via other torque wrench
parts. Do not use the torque wrench without
the reaction arm.
6
6
WARNING:
must be used to secure the reaction arm on
the wrench body to prevent from slipping off. It
must "click" in the slot of the reaction arm.
7
7
CAUTION: Avoid tilting the wrench. Do not
use extensions. If this is unavoidable due to
the reaction point, the torque (pressure) must
be reduced. An extra support must be used to
minimize tilting and friction. When in doubt,
contact Enerpac.
8
WARNING: See
personal injury, do not remove the protection
plate or modify the wrench, its accessories or
change the safety valve setting on the swivel
hose connection.
4
"CLICK"
The locking mechanism (3)
8
. To avoid damage and