Publicité
Liens rapides
Wall Caps
MODEL: 885 SERIES
The Wall Cap is designed for use with 3" or
4" round duct.
INSTALLATION
The Wall Cap consists of two (2) sections: the
cap assembly and the 3" to 4" round transition.
When 3" duct is used, install reducer as
illustrated.
Attach Wall Cap to the outside wall with screws
through the provided holes in flange.
Chaperons muraux
MODÈLE: SÉRIE 885
Le chaperon mural est conçu pour une utilisation avec une gaine
ronde de 3 ou 4 po.
INSTALLATION
Le chaperon mural comprend deux (2) parties: ensemble de chaperon et
réducteur rond de 3 à 4 po.
Si on utilise une gaine de 3 po, installer le réducteur comme le montre
l'illustration.
Fixer le chaperon mural au mur extérieur en faisant passer les vis par
les ouvertures prévues dans les rebords.
READ & SAVE THESE INSTRUCTIONS!
1
6
/
"
2
5"
3
2
/
"
4
LIRE ET CONSERVER CES INSTRUCTIONS!
INSTALLATION INSTRUCTIONS
3"
3" TO 4"
REDUCER
3 À 4 PO
RÉDUCTEUR
MODE D'INSTALLATION
4"
Publicité
Manuels Connexes pour Broan-NuTone 885 Série
Sommaire des Matières pour Broan-NuTone 885 Série
- Page 1 INSTALLATION INSTRUCTIONS READ & SAVE THESE INSTRUCTIONS! Wall Caps MODEL: 885 SERIES The Wall Cap is designed for use with 3" or 4" round duct. INSTALLATION The Wall Cap consists of two (2) sections: the cap assembly and the 3" to 4" round transition. "...
- Page 2 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. During this one year period, Broan-NuTone LLC will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service. THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS OR TUBES. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or repair (other than by Broan-NuTone LLC), faulty installation or installation contrary to recommended installation instructions.