Using The Radio; Tuning In Radio Stations; Storing Preset; Tuning To A Preset Radio Station - Kenwood HM-337-SG Mode D'emploi

Using the radio

Tuning in radio stations

1 Press TUNER/band button (TUNER/BAND
button on the remote control) to select the
desired waveband: FM or AM.
2 Press and hold 4 or ¢ button (4 or ¢
SEARCH/SKIP/TUNING button on the remote
control).
Repeat this procedure until the desired station
is reached.
To tune to a weak station briefly press 4 or
¢ button (4 or ¢ SEARCH/SKIP/TUN-
ING button on the remote control) repeatedly
until the display shows the desired frequency
or when the best reception has been obtained.

Storing preset

You can store up to 20 for FM and 20 for AM radio
stations in the memory. When a preset radio sta-
tions selected. The preset number appears on the
display.
1 Press TUNER/band button (TUNER/BAND
button on the remote control) to select the
desired waveband: FM or AM.
2 Press 4 or ¢ button (4 or ¢ SEARCH/
SKIP/TUNING button on the remote control)
to tune to the desired frequency.
3 Press program button (PROGRAM button on
the remote control) so that "– –" will start flash-
ing.
4 If you wish to store the radio station to another
preset number, p.call + button (P . CALL + but-
ton on the remote control) or p.call – button (P .
CALL – button on the remote control) to se-
lect the desired preset number.
5 Press program button (PROGRAM button on
the remote control) again to store the radio
station.
Repeat steps 2 to 5 to store other preset ra-
dio stations.
Note:
During program, if no button is press within 20 sec-
onds, the system will exit program mode automatically.

Tuning to a preset radio station

Press p.call + button (P . CALL + button on the
remote control) or p.call – button (P . CALL – but-
ton on the remote control) or digit buttons (0~9)
on the remote control to select the desired pre-
set number.
• The preset number and radio frequency will
appear on the display.
STEREO/MONO
Press the STEREO/MONO button on the remote
control to select mono or stereo mode.
• When stereo mode is selected, the icon "STE-
REO" will appear on the display (if current sta-
tion is FM stereo).
Note:
You are able to select stereo or mono mode in FM band
only.

Using RDS (Radio Data System)

RDS is a system that transmits useful informa-
tion (in the form of digital data) for FM broadcasts
along with the broadcast signal. Tuners and receiv-
ers designed for RDS reception can extract the
information from the broadcast signal for use with
various functions, such as automatic display of the
station name.
RDS functions:
PTY (Program TYpe Identification) Search
Automatically tunes to a station that is currently
broadcasting the specified program type (genre).
PS (Program Service Name) Display:
Automatically displays the station name transmit-
ted by the RDS station.
Radio Text function:
Displays the radio text data transmitted by some
RDS stations when you press RDS/display/demo
button on the unit (RDS/DISPLAY button on the
remote control). There is "NO TEXT" display if no
text data is transmitted.
• The icon "R·D·S" appears on the display when
an RDS broadcast (signal) is received.
continued to next page
11
EN