THOMSON Dandy Collection THCO912IX Mode D'emploi page 19

Note 1: During the brewing process, you can remove the carafe for no
more than 30 seconds and the brewer can automatically stop pouring. If
the service time exceeds 30 seconds, coffee will flow from the funnel.
Note 2: This unit has an intensity adjustment function. If you want to
increase the intensity of the coffee, you can press the switch button for 4
seconds to start brewing. The indicator will blink constantly until the end of
coffee brewing.
At the end of the brewing process, that is one minute after the coffee has
stopped flowing, you can remove the carafe and serve.
Note: The prepared coffee you get will be slightly lower than the added
water (in quantity) because water is absorbed by the coffee powder. DO
NOT touch the lid, hot plate, etc. during operation because they are very
hot.
When the process is finished, if you do not want to use it immediately, keep
the switch on, this will keep the coffee warm for 40 minutes and the
appliance will turn off automatically after this time.
For an optimal coffee taste, serve it just after brewing.
Always turn off the coffeemaker and unplug the power supply after use.
DESCALING AND CLEANING
Before cleaning, turn off the coffee maker, unplug it from the mains and
let it cool. Never immerse the body of the coffee maker in water or any
other liquid.
DESCALING:
We recommend that you descale your appliance regularly to keep it in
•
good condition. To do this, use a descaling agent for coffee maker that
you can find on the market and follow its instructions.
CLEANING:
Do not wash any part of your coffee maker in the dishwasher.
•
Clean the outside of the appliance with a soft cloth.
•
Clean the detachable parts in warm water with dishwashing
•
detergent and then rinse.
Before reinstalling the parts, remember to dry them thoroughly.
•
EN-8