Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GETTING TO KNOW YOUR APPLIANCE
Lid of the jug
Carafe handle
USING YOUR APPLIANCE FOR THE FIRST TIME
1. Remove all packaging from the outside and inside of the coffee
maker.
2. Before first use, make sure that the voltage indicated on the rating
plate of the coffee maker is compatible with the voltage of the
power supply.
3. If you need to use an extension cord, it must be grounded.
4. To clean the inside of the coffee maker before first use, pour water
into the tank (without coffee) and turn the appliance on. Once the
water is emptied out, turn off and repeat this after 5 minutes.
OPERATING YOUR APPLIANCE
1. Open the water tank cover and pour the desired amount of water
into the tank. Observe the minimum and maximum level
indicated on the tank.
2. Insert a paper filter into the filter holder.
3. Add coffee powder into the paper filter.
4. Close the covers, which is imperative for starting the coffee maker.
5. Place the pot on the coffee maker.
6. Turn the appliance on, an indicator light will illuminate.
7. After the coffee has stopped dripping, wait until the filter is
completely empty before removing the coffee pot.
8. The hotplate keeps your coffee warm.
Note: Automatic-off protection：The machine will switch off automatically
in 40 minutes after last brewing.
Filter holder
Water tank
Jug
Hotplate
EN-7
Top cover
Sprayer
Water reservoir
with level of
filling
On / Off switch
Publicité
Table des Matières
