Koenic KSI 270 Mode D'emploi page 20

English
Troubleshooting
If there are any problems during operation, please refer to the following table. If problems cannot
be solved as indicated under Solution, please contact your manufacturer.
Problem
Water droplets
escape from the
soleplate
20
IM_KSI270_160119_V03_HR.indb 20
Possible causes
• After stopping steam ironing
condensed water drops can
be ejected when continuing
steam ironing.
• Ironing temperature is too low. • Steam ironing and steam jet
Solution
• It is not a malfunction.
• To avoid droplets when
continuing steam ironing, do
not hold the soleplate over the
garment until regular steam
escapes.
function are only available at a
higher temperature setting (
and above).
• Adjust to a suitable temperature
or switch off the steam function.
19/1/16 9:55 AM