Nilox FOOLISH DUCATI Mode D'emploi page 17

9. AV output connection:
In preview state, connect FOOLISH DUCATI with the display device with AV cable, and then all functions of
FOOLISH DUCATI can be operated.
Note:
After connecting with audio and video display device, TFT screen on FOOLISH DUCATI and the voice will be turned off,
and the audio and video will be displayed on the display device. LCD segment screen on FOOLISH DUCATI will display
the corresponding function operations normally.
10. HDMI output connection: In preview state, connect FOOLISH DUCATI with the high-definition display device with
HDMI cable, and then functions of 5D19 can be operated; however, digital zoom function cannot be operated
in720P/1080P mode;
Note:
a. After connecting with HDMI display device, TFT screen on FOOLISH DUCATI and the voice will be turned off, and
the audio and video will be displayed on the display device;
b. FOOLISH DUCATI may be in abnormal state if the HDMI cable is inserted or unplugged improperly when
connecting. It can be recovered after re-starting and LCD segment screen will display the corresponding function
operations normally.
11. USB connection:
a. When there is no preset battery in FOOLISH DUCATI, use USB power adapter to connect with FOOLISH DUCATI,
all functions can be operated (meanwhile, LCD segment screen and TFT display screen will display the corresponding
operation prompts);
b. ln startup state, use USB cable to connect with the computer, data stored in FOOLISH DUCATI memory and the
Micro SD card can be read (at this time, LCD segment screen will display the USB connection state icon);
c. FOOLISH DUCATI may be in abnormal state if the USB cable is inserted or unplugged improperly when connecting,
and re-start to recover.
12. Prompt of key tone:
a. Press "Record" or "Shutter" key once in normal using, FOOLISH DUCATI will tick once to indicate the
effective operation;
b. When stopping video recording, FOOLISH DUCATI will tick twice;
c. FOOLISH DUCATI will tick twice to indicate the successful code pairing;
d. Press "Shutter" key in video recording, FOOLISH DUCATI will not give prompt;
e. When operating on TFT display screen, press "Menu" key in preview state, press ">" or "<" key to enter
the menu "Setup", press"+" or"-" key to select the menu "Key Tone", and then you can turn on or turn off the key
tone;
f. If the system is in video recording, press "Stop" key on the remote control once, FOOLISH DUCATI will
tick twice to indicate the video recording stopping;
g. lf the system is in video recording, press "Shutter" key on the remote control once, FOOLISH DUCATI
and horn on TFT display screen will not give any prompt;
h. Press any key on the remote control in standby state, FOOLISH DUCATI will tick once to wake up the main system.
13. Prompt of laser light
~ 17 ~