Connecting The Speed Sensor - Pantera Falk Mode D'emploi

CONNECTING THE SPEED SENSOR *

Fitting the magnet for measuring the speed
Please note that, before you start the sensor search on the de-
vice, you must have attached both sensors to the bicycle. Please
attach the magnet to one spoke. Move the wheel and then tap
on your device under settings on „Search for sensor".
Magnet
Please note that between the speed sensor and the magnet on a
spoke there should be a gap of no more than 5 mm.
Please move the S sensor on the frame so that the gap is no more
than 5 mm.
Please be aware that the S sensor on the frame needs to be fi tted
so that it faces downwards in order to avoid damage to the spokes.
24 * Applies to PANTERA products in the + series
QSG_Pantera_FMI_10002_4_languages_korr.indd 24
Spoke
Frame
S Sensor
Magnet
S sensor
Spoke
Magnet
5 mm
5/17/2013 4:48:22 PM