How It Works - Vornado Touch Stone 600 Guide De L'utilisateur

The TVH 600 has no user serviceable parts. Do not disassemble the unit – it will void your
warranty. If service is required, return your heater to Vornado (see Limited Warranty).
The motor is permanently lubricated and requires no oiling.
Because the TVH 600 moves a great deal of air, it will need regular
surface cleaning. Be sure to unplug the unit prior to cleaning.
With a vacuum, clean the air inlet on the back of the unit and
the outlet grill vanes on the front of the unit.
During the off-season or extended periods of non-use, store your heater.
Unplug the unit, bundle the cord, save the plastic bag that the heater
was shipped in so that you can cover the unit and minimize
settling dust.
Vornado leads the industry in the advancement of portable electric heater technology. The
TVH 600 provides the most advanced heater interface to date.
Smart Remote Temperature Sensor
This innovation incorporates continuous monitoring of the temperature
at the location of the remote. This temperature reading is then
transmitted back to the base unit. The TVH600 automatically
adjusts heat output and fan speed to meet and maintain the desired
temperature set. The benefit of this technology is when you position
the Smart Remote Temperature Sensor near you, the heater will
automatically adjust to meet your desired temperature at that
always attempt to operate using the sensor information from the remote, if a signal cannot
be obtained, the base unit will function on its own.
Fully control the TVH 600 remotely with the Smart Remote Temperature Sensor with
illuminated screen. Turn the unit ON and OFF, select mode - FAN ONLY, LOW HEAT or
HIGH HEAT, adjust the desired set temperature up or down, and set the automatic-off timer,
all from up to 30 feet away. As you adjust the remote, the base unit will "beep" to indicate it
has received your signal. The screen-light will dim after just a few seconds, to minimize room
illumination. The Remote does not require "line-of-site" to operate.
Illuminated Touch Screen
Innovative and easy to use, the Touch Screen provides complete control at the base unit. Just
touch the screen to "wake-up" or turn on the screen. Follow the intuitive display and touch
the screen to adjust mode, desired temperature, and timer. The Timer can be set to turn the
unit off automatically in hour intervals up to 9 hours. The screen-light will dim after just a few
seconds to minimize room illumination. Both the remote and the base unit feature one-button
ON/OFF control.
Automatic Climate Control
With this unique technology, the TVH 600 does not cycle on and off like most ordinary
heaters, but uses continuous variable heat and air output to maintain the set temperature.
This allows the unit to often run on less than high power, minimizing noise and energy
all while maintaining your set comfort level.
Maintenance

How It Works

www.sylvane.com 1-800-934-9194
location.The base unit will
use,
7