Maintenance And Service - Henry Schein HS-TIERWAAGE Mode D'emploi

is no danger of other equipment being affected by this product.
If you have any problems, please contact your service partner.
Warning: This device must not be modified without the manufacturer's permission. If
medical equipment is modified, suitable tests and inspections must be performed to
ensure that it can still be used safely.
4.4 Cleaning
Before cleaning, disconnect the equipment from the power supply by pulling out the
mains plug. The device should be cleaned only with a moistened cloth. In no
circumstances should water be allowed to penetrate the device. Disinfectants should be
used only on the foil keypad of the display panel.
The following disinfectants are allowed:
Methylated spirits; isopropanol; 2% Kohrsolin; 1% aqueous Sokrena solution; 5%
Sagrotan;
5% Gigasept. Do not spray the equipment or the connecting plug.

4.5 Maintenance and service

Metrological control has been carried out by the manufacturer. This scale does not
require regular maintenance. However, it is advisable to check its accuracy at regular
intervals. The frequency of these checks depends on the type of use and the condition
of the scale. If deviations are found or repairs are necessary, please contact your dealer
or the manufacturer's Customer Service.
4.6 Warranty / liability
If the supplied goods contain a defect attributable to the manufacturer, the manufacturer
will be entitled to choose either to rectify the defect or to provide a replacement.
Replaced parts become the property of the manufacturer. If the defect cannot be
rectified or the supply of a replacement is unsuccessful, then the statutory regulations
will apply.
The warranty covers a period of 2 years starting from the date of purchase. Please
keep your invoice as proof of purchase. If your device needs service, please contact
your dealer or the manufacturer's Customer Service.
www.henryscheinbrand.com
14