Wall Mount Bracket; Care, Cleaning And Storage; Whisk - SOLIS 838 Mode D'emploi

Wall mount bracket

The wall mount bracket can be fitted to the wall
to provide a convenient storage point for the hand
blender and cord.
1. Find a suitable and convenient location for the
wall mount.
2. Fit the wall mount to the wall.
3. Check the wall mount is secure and that it will
hold the weight of the appliance.

Care, cleaning and storage

E
Hand blender
Before cleaning remove the plug. Remove the
motor body from the stainless steel blending shaft.
The stainless steel blending shaft should be hand
washed in hot soapy water, rinsed and dried tho-
roughly after each use.
Do not use abrasive cleaners or steel wool.
QUICK WASH: Between each processing task, with
the motor body attached and turned on at the
power outlet, place the stainless steel blending
shaft and blade assembly only in to a jug of water
and press the 'ON' button for 5 seconds. This will
remove any food on the blade and shaft and allow
you to continue onto the next processing task.
Anleitung_Gourmet_Mixer_def.indd 45
Chopping bowl
Before cleaning remove the plug. Remove the motor
body from the chopping bowl lid, and then remove
the lid and chopping blade from the chopping bowl.
The chopping bowl, chopping bowl lid and chopping
blade should be hand washed in hot soapy water,
rinsed and dried thoroughly after each use. Do not
use abrasive cleaners or steel wool.

Whisk

Before cleaning remove the plug. Remove the
whisk. The whisk should be hand washed in hot
soapy water, rinsed and dried thoroughly after each
use. Do not use abrasive cleaners or steel wool.
Motor body
To remove any food residue wipe the motor body
and cord with a damp cloth only. Do not use
abrasive cleaners or steel wool.
Never immerse the motor body in water or any
other liquid.
Note
The detachable blender shaft and whisk
attachment (without the plastic gear box) are
dishwasher safe.
Do not wash any other parts of the Wizz Stick
Professional in the dishwasher.
Blades are extremely sharp, handle with care.
Storage
Before storage remove the plug. Ensure the appli-
ance is clean and completely dry.
Attach the blending shaft to the motor body
and place into large hole in wall mount bracket.
Fold the cord and place into smaller hole in wall
mount bracket.
Place the chopping blade into the chopping bowl
and insert the chopping bowl lid. Place the whisk
into the jug. Store upright on the bench or in a
convenient cupboard.
E
45
5.3.2007 11:43:47 Uhr