RISCO Group VUpoint Série Guide D'installation page 13

Editing an NVR
You can edit a selected NVR and add or remove cameras from the NVR.
To edit an NVR:
1. From the NVR page, click the NVR Name; the Edit NVR screen opens.
Field
Name
Firmware
Local Access
NOTE: You can delete the NVR from the site by clicking Delete NVR from the
bottom right of the screen.
RVNVR080020
Figure 14 Edit NVR Screen
Description
Change the name of the NVR, if required
Click Check to confirm if a new firmware version is available.
Click Set and then select UI/CGI to enable access to the NVR's web
interface for a time period of 60 minutes.
13