Cleaning And Maintenance - SOLAC Q603 Mode D'emploi

USER INSTRUCTIONS
• Insert two "LR20" batteries in the compartment (6) with the poles as indi-
cated. Make sure you insert the batteries correctly.
• Close the battery compartment by pressing on the lid and sliding it do-
wnwards.
• Select the closeness level using the closeness level selector (2).
• Turn the ON/OFF switch (1) to the ON position.
• Place the garment on a smooth surface. Without pressing, gently glide the
fabric shaver over the stretched garment, changing the closeness selector
(2) as required.
• After use, switch the fabric shaver off by turning the switch (1) to the OFF
position.
• We recommend that you empty the lint chamber (5) after each use.

CLEANING AND MAINTENANCE

• Before cleaning the fabric shaver, make sure that it is switched off.
• Remove the lint chamber (5) by sliding it downwards, and empty it. The
lint chamber must not fill up more than
• To clean the shaving head, remove the closeness adjustment ring (2),
sliding it outwards until it comes free from the unit; remove the shield's
plastic casing using a flat-edged tool and carefully remove the lint using
the supplied brush (4) taking care not to damage the shaving head.
• Clean the plastic casing with a dry cloth.
• Return the blade and the plastic casing to their original positions.
8
Q-603 8
3
/ of the way.
4
21/9/04, 17:51:22