Ordering Replacement Parts - Einhell Royal KSB 101 Instructions De Montage

Anleitung KSB 101 SPK7 17.06.2005
GB
1. Items supplied (see Fig. 1)
1 Machine foot
2 Cross strut
3 Diagonal strut
4 Nut M6, self-locking
5 Screw M6x18
6 Screw M8x12
7 Nut M8, self-locking
8 Washer Ø6mm
2. Assembly (see Fig. 1)
First screw the feet (1) together.
To do so, arrange the feet in pairs as illustrated
in Figure 1 and screw each pair together with a
M8x12 screw (6) and self-locking nuts M8 (7)
so that the feet can still be swiveled. Then
insert the M6x18 screws (5) below the two slots
and secure with 6mm washers (8) and M6 self-
locking nuts (4). Please make sure that the feet
can still be folded.
Finally, join together the pre-assembled feet
with the cross struts (2) and the slightly longer
diagonal struts (3) using M6x18 screws (5) and
M6 self-locking nuts (4.).
Important!
Be sure to wear safety gloves and all other
essential safety equipment when working
on the sawing trestle!
It is also imperative to follow the safety
instructions issued with the saw!
3. Folding down the sawing trestle:
After work is completed, the sawing trestle can
be folded down for storage in minimum space.
4
11:31 Uhr Seite 4

4. Ordering replacement parts

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part requi
red
For our latest prices and information please go
to www.isc-gmbh.info