Lindy BTA-30 Manuel De L'utilisateur page 2

User Manual
Introduction
Thank you for purchasing the LINDY BTA-30 Bluetooth Audio Receiver with NFC. The BTA-30 adds Bluetooth audio
connection capabilities to HiFi, Headphones or speaker systems with 3.5mm inputs or Phono*. Compatible with
modern Bluetooth devices, and with the added benefit of NFC for easy pairing, the BTA-30 seamlessly delivers audio
from your smartphone, tablet or other Bluetooth enabled devices for playback directly on your audio system.
Simple to set-up and with a maximum range of 10m, the BTA-30 is ideal for home & mobile use, helping you make
the most of your mobile audio experience.
*requires 35.mm to Phono cable, not included.
Package Contents

BTA-30 Bluetooth Audio Receiver with NFC

USB Micro-B cable

3.5mm stereo audio cable

LINDY Manual
Features

NFC Easy Pairing

3.5mm analogue audio output

Built in Microphone for Speakerphone functionality

USB Micro-B female - power & charging

Internal rechargeable 230mAh lithium-ion polymer battery
o
2 hours charging time
o
Up to 12 hours playback

10m effective range

A2DP Bluetooth profile support
Specification

Bluetooth 3.0 +EDR with A2DP

Bluetooth Frequency: 2.402-2.480GHz

Supported Codecs: SBC

Audio output: 1 x 3.5mm female

Signal To Noise Ratio: ≥ 94dB

Compression ratio: 44.1 / 48KHz

Frequency Response: 100Hz ~ 22kHz

Algorithmic Delay: 40ms

THD+N: 0.03% @ 20mW/f = 1kHz

Chipset: BM81SPK02

Weight: 40 grams

Operation temperature: -10°C ~ +55°C, Storage temperature: -20°C ~ +60°C
Note – If you want to use the BTA-30 with a Phono input on your HiFi / Speaker System, please use a 3.5mm to
Phone cable, such as LINDY No. 35490 – 7.
English