Econ SHL 100-Ex Notice D'utilisation page 22

3. Function/operating
Note: Position number in () see sketches on page 25-26.
Activate portable lamp
Please plug positive pole onto the ac-cumulator!!
For that open the housing:
• Unscrew 3 Torx screws on the left and right at the case and on the bottom (5).
• Extract back panel (8) from the case.
• Plug positive pole (4) onto the termi-nal lug.
• Re-close the case and screw it up
Operation
The portable lamp can be switched on and off by the push-button key (0) installed in the lamp
head.
Switching steps: ON-Flashing-OFF
Focusing
The main lamp can be very simply focused from outside (9) on point light and wide-spread light.
Lamp monitoring
a) Incandescent filament breakage check outside of charging set: In case of defec-tive main lamp
there will be an auto-matic change-over to economy lamp.
b) Incandescent filament breakage check in parked charging set: Defective condi-tion will be
indicated by flashing of a LED at the charging chair.
c) Setting in and removing the portable lamp into and/or from the charging chair there will be a
short flashing of main and economy lamp as a visual inspection of lamp function.
Charging condition display (7)
Charging condition of battery will be indi-cated by 5 luminous diodes.
Capacity of battery Colour of luminous diode
> 75 %
> 50 %
> 25 %
< 25 %
< 0 %
green
¢¢¢¢¢
green
¢¢¢¢
green
¢¢¢
yellow
¢¢
red
¢
9 Total discharge g repeated flashing of
LED
Note
Charging desired
Charging urgent
2