Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Where to install your device?
-
This equipment was designed to be installed in a residence. Please ask
your distributor before using it for any other purpose.
-
The device should be installed according to normal trade practice and
device should be installed according to normal trade practice and
incompliance with legislation in the relevant country (NFC 15-100 for
incompliance with legislation in the relevant country (NFC 15-100 for
France).
-
The equipment is class 2 and is protected against splashed water IP 24.
The device can be installed in volume 2 of a bathroom It's forbidden
to install the device in the volume 1. The device is to be installed so
that switches and other controls cannot be touched by a person in
the bath or shower.
Do not install the device :
-
In a draught that might affect adjustment (for example, under a central
mechanical ventilation unit etc...).
-
materials.
-
In a conform position, the air outlet grid and the control unit is visible
in the upper part of the device. It is forbidden to install a vertical unit
horizontally and vice versa.
INSTALLATION
50
Comply with the minimum clearance distances for
Comply with the minimum clearance distances for
25
50
positioning of the device.
25
Do not install a shelf above vertical devices.
12
Volume 1 No electrical device
Class II IPX4 electrical device
Volume 2
(Norme EN 60335-2-43 : 2003/A2 :
2008)
21
EN
Publicité
Table des Matières
