GB - INSTRUCTION MANUAL
Enginge does not reach full rpm
1) dirty spark plug
2) dirty carboretor
3) check exhaust
4) piston or piston rings worn down
5) wrong fuel mixture
6) spark failure
7) dirty air filter
9. SERVICE AND REPLACEMENT PARTS
Clean all plastic parts with a damp cloth only. Do not use solvents or cleaning agents.
Clean the air filter on a regular basis.
Clean the spark plug or replace it when necessary.
Clean air vents and moving parts with a brush, to remove any dirt.
The more frequently you use the auger, the more regularly you need to perform those maintainance works.
Repairs must be done by authorized professionals only!
10. WARRANTY
Legal warranty regulations apply.
11. DISPOSAL
Our products are packed in order to prevent damage during transport. Packing materials are va-
luable resurces and therefore can and should be recycled. The product itself consists of various
materials (metals, oils, plastic, etc.) and should be disposed with care and in accordance with your
federal and local disposal regulations.
12. LEGAL INFORMATION
All rights reserved. This manual is copyrighted. Reproduction in and form (digital, print, etc.) is
strictly prohibited without the written permission of ERBA GmbH.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Page 16
Changes, print, punctuation and other errors reserved!
Instruction manual
98008
Issue: 05/2020