Operation Instructions; Exterior Assembly Overview; Factory Settings - Honeywell 8732001 Guide De Configuration Et D'utilisation

OPERATION INSTRUCTIONS

Exterior Assembly Overview
Programming Symbols
Lock / Clear
Unlock / Programming
Programming Code
PC
User Code (4-8 digits)
UC
ID
User ID (01-50, 2 digits)
Programming Tips
5 Seconds - Complete all the programming steps in the programming mode within 5 seconds.
Clear - Use the key to clear entries in case a wrong button is pushed.
Green
• Indicates Successful Programming Step
Indicator light • Indicates Unlocking is Successful
Red
• Indicates Failed Programming Step
• Indicates Locking is Successful
Lock button
Lock - Used to lock door
Clear - Used to clear wrong keypad entries
Unlock button
Unlock - Used to unlock door
Programming - Used in programming steps
Batteries (not included)
Electronic lock requires (4) High Quality
AA Alkaline batteries. When all 4 batteries
are installed in the correct position, hear 2
beeps and the keypad will illuminate blue.
DO NOT TOUCH the keypad until the keypad
stops illuminating.
Factory Settings
The lock comes factory preset with a:
Programming code - 123456
PC
User code - 1234
UC
ID
User ID - 01
Please change the Programming
Code
PC
as soon as possible after installation
to insure security.
and the User Code
UC
Page 7