ARIETE grati 447 Mode D'emploi page 15

Reassembling the appliance
Before using the appliance again, it needs to be reassembled as follows:
- lift the presser (D) and fit the removable section (M) into the seat, pressing it
until it clicks into place (Fig. 9). Make sure that the tap enters the slot in the
presser (D);
- insert the hopper (G) as far as it will go inside the appliance body (E) (Fig. 10);
- fit the lid (L) onto the appliance body (E) making sure it is perfectly lined up
inside its housing and pressing it gently until it clicks into place (Fig. 11);
- insert the roller (H) into its seat inside the appliance body (E) and holding it
down, turn it by a 1/4 turn clockwise (Fig. 12).
IMPORTANT: Before using the appliance, make sure that all parts have been
correctly fitted inside it.
- 13 -
E N