Assignment Of The Dmx Channels In The Overview - involight VENTUS M Mode D'emploi

select DMX start address
now set the desired start address.
MASTER/SLAVE-OPERATION:
The "VENTUS M" can be linked to other devices. To set a device as a "slave", press the "
Slav
" " appears in the display. Confirm with the "
device. The interconnected devices now work synchronously
DISPLAY INVERTING:
"Menu"
Press the
buttons to select whether the display should be set for normal use
"Enter"
Confirm with the
head is mounted overhead.

3.3 Assignment of the DMX channels in the overview:

NOTE: Basic knowledge of the DMX512 control standard is required so that the device can be correctly
operated and programmed with a DMX controller.
4 Channel mode:
CH1
CH2
SMD LED
CH3
CH4
"d1" "d512".
to
"disp"
button until
key. The display can thus be adjusted so that it also displays correctly when the
0-9 No function
47392 Red
30-49 Green
50-69 Blue
70-89 White
90-109 Red+Green
110-129 Red+Blue
130-149 Red+White
150-169 Green+Blue
170-189 Green+White
190-209 Blue+White
210-219 Red+Green+Blue
220-229 Red+Green+White
230-239 Red+Blue+White
240-249 Green+Blue+White
250-255 Red+Green+Blue+White
0-9 No function
10-29 1#
30-49 2#
50-69 3#
70-89 4#
90-109 1#+ 2#
110-129 1#+ 3#
130-149 1#+ 4#
150-169 2#+ 3#
170-189 2#+ 4#
190-209 3#+ 4#
210-219 1#+ 2#+ 3#
220-229 1#+ 2#+ 4#
230-239 1#+ 3#+ 4#
240-249 2#+ 3#+ 4#
250-255 1#+ 2#+ 3#+ 4#
0-9 No Strobe
SM S ob ( s ow → as )
10-255
0-9 No function
"Up"
With the
Enter
" key. Select the desired program from the master
is displayed. You can now use the
"dISP"
22
"Down"
and buttons, you can
Menu
"Up"
and
or for use via head
" key until
"Down"
"d. S IP".