Step 4 - Option 1: Attach Hardware To A Flat Back Tv - Dynex DX-DTVMFP23 Guide D'installation

STEP 4 - Option 1: Attach hardware to a flat back TV

You'll need
Screws
OR
E (4)
OR
OR
L (4)
Note: If you plan to use a 5° tilt with a larger TV (42"+), we suggest using spacers with the
mounting brackets so that the bottom of your TV does not touch the wall.
Align the left and right TV brackets (B and C) with the screw holes on the back of
1
your TV. Make sure that the brackets are level.
10
J (4)
G (4)
OR
M (4)
www.dynexproducts.com
Washers
OR
H (4)
B and C TV brackets
Level
Phillips screwdriver