Sorting Load; Loading The Dryer; Check The Lint Filter Before Every Load - LG DLEX3570 Série Mode D'emploi

Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for
more detailed information.

Sorting Load

Fabric care labels
Most articles of clothing feature fabric care labels that
include instructions for proper care.
Fabric care labels
Tumble
dry
Dry
Gentle/
Do not tumble dry
delicate
Heat
setting
High
Grouping similar items
For best results, sort clothes into loads that can be dried
with the same drying cycle.
Different fabrics have different care requirements, and
some fabrics will dry more quickly than others.

Loading the Dryer

WARNING
To reduce the risk of fire, electric shock, or injury
to persons when using this appliance, follow basic
precautions, including the following:
in fire, explosion, or death.
Failure to obey this warning can result in fire, explosion,
or death.
NOTE
Loading tips
overload the dryer; clothes require room to tumble
dry properly.
these items from snagging or tangling on other
clothes.
Normal Permanent Press/
wrinkle resistant
Do not dry
(used with
do not wash)
Medium
Low No heat/air
Failure to do so can result
Check the Lint Filter Before Every
Load
Always make sure the lint filter is clean before starting a
new load; a clogged lint filter will increase drying times.
To clean, pull the lint filter straight up and roll any lint
off the filter with your fingers. Do not rinse or wash the
filter to remove lint. Push the lint filter firmly back into
place. See
Always ensure the lint filter is properly installed before
running the dryer. Running the dryer with a loose or
missing lint filter will damage the dryer and articles in
the dryer.
29
HOW TO USE
for more information.
Lint
Filter