PURE Siesta S2 Mode D'emploi page 4

Safety instructions and cautions
Symbols used on this product
Symbol
Note: For information on all the other symbols used on the product, download the Siesta S2 user guide
from support.pure.com.
1. Read, heed and retain these instructions – All the safety and operating instructions should be
read before this product is used and retained for future reference. All warnings on the appliance
and in the operating instructions should be followed.
2. Failure to install or use the product in accordance with these instructions may impair the safety of
the product and invalid the warranty.
3. Use only power supply listed in these user manual/user instructions (supplied by Pure with model
number : SW055-900-AM and SW055-900-A01) to power the equipment and do not use the
power supply for any other purpose.
4. The direct plug-in adapter is used as a disconnect device, the disconnect device shall remain
readily operable and accessible.
5. Do not immerse in water or use in a wet / moist environment, such as in the shower or bathroom
if plugged into the mains supply. The power supply shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, placed above it.
6. Do not remove screws from or open the product casing. Product repairs are only to be carried
out by competent and authorised personnel. Do not use the product if any damage is noticed.
7. Keep the product away direct sunlight and from heat sources such as radiators, heaters or other
appliances that produce heat.
8. Do not expose the product to naked flame sources, such lighted candles which should not be
placed on or near the product.
9. Ventilation should not be impaired by covering the product or power supply.
10. Clean only with a dry cloth.
11. This product is intended for use in moderate climates.
12. If the product is used in a manner not specified by the instructions, the product's protection could
be impaired.
13. Do not use the product if any damage is noticed.
14. Product repairs are only allowed to be carried out by competent and authorised personnel.
2
Description
This WARNING symbol is used throughout this manual to indicate a potentially serious
risk to your personal safety. Obey all safety notices that accompany this symbol to avoid
possible injury or death.
This symbol is used on the product to indicate a caution and that instructions should be
read before use.
This symbol indicates DC voltage.
This symbol indicates where the product is switched on or put into standby.