Parrot DS3120 Guide Utilisateur page 9

the SD Card into the appropriate slot. Refer to the
diagrams p. XX
> The content of the audio player / mass storage device /
SD card is automatically displayed.
> If you want to get back to the content of your audio
player / mass storage device/ SD Card for further uses,
select USB/SD from the main menu. Then select your
audio player / mass storage device and press Enter.
2. To visualize the content of your audio player / mass
storage device:
- If the tags of your audio files are correctly defined,
select one of the following options: Playlist, Artist,
Album, Songs, Genres and Years.
- If the tags of your audio files are not defined:
a. Select the Browse by directory option.
b. Browse the content of your audio player
using the up/down arrows
c. Select the music file and press Enter to start
playing it.
2. Using an audio player with the jack cable
1. Use the jack/jack cable to connect your audio player to
the Parrot DS3120.
2. From the main menu, select Line In.
> The sound is directly streamed through the speakers of
the Parrot DS3120.
3. Using the radio function
N : u
ote se the aNteNNa loCated iN the batteries CompartmeNt
to eNsure the best possible quality of reCeptioN
.xx.
diagram p
1. From the main menu, select Radio > FM Stations.
> The list of stations available through RDS is displayed.
2. Press Enter to select a station.
> Briefly press the Previous/Next buttons to change
manually the radio frequency.
> Hold the Previous/Next buttons to perform a quick
tuning.
3. Select Save preset and press Enter.
4. With the up/down arrows:
- Select the Append to presets option to add a station
following the already memorized ones.
- Select an already memorized station you want to erase.
. r
efer to the