Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Danger!
The pump must be powered via an earth-
leakage circuit breaker (RCD) with a rated
fault current of no more than 30 mA (accor-
ding to VDE 0100 Part 702 and 738).
The equipment is not designed for use in
swimming pools and paddling pools of any
kind or other bodies of water in which people
or animals may be present during operation.
It is prohibited to operate the equipment if a
person or animal is in the danger area. Ask
your electrician!
•
Before you put the equipment into opera-
tion, arrange for a specialist to check that
the earthing, protective multiple earthing or
residual-current operated circuit-breaker cir-
cuit comply with the safety regulations of the
power supply company and work correctly.
•
The electrical plug-in connections must be
protected from wet conditions.
•
If there is a risk of flooding, place the plug-in
connections in an area which is safe from
flooding.
•
Strictly avoid pumping aggressive liquids and
abrasive substances.
•
Protect the equipment from frost.
•
Protect the equipment from dry running.
Anl_NCSP_E_60_i_SPK7.indb 13
Anl_NCSP_E_60_i_SPK7.indb 13
GB
•
Take suitable measures to keep the equip-
ment out of the reach of children.
2. Layout and items supplied
2.1 Layout (Fig. 1)
1. Handle
2. Floating switch
3. Intake cage
4. Hose connection
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Dirty water pump
•
1x connection bracket for hose connector ap-
prox. 38 mm (1 ½")
•
1x connection bracket for hose connectors
•
3x hose connectors (approx. 32 mm (1 ¼"),
approx. 25 mm (1"), approx. 19 mm (¾"))
•
5x sealing rings
•
Original operating instructions
- 13 -
23.04.14 15:50
23.04.14 15:50