Hints on Remote Control
1.
At first, place the batteries into the remote control.
2. Open the battery compartment.
3. Insert the batteries AAA (UM-4), made sure to match+ and - of the batteries to the marks in the
battery compartment.
4. Close the battery cover.
NOTE: Improper use of the batteries may cause battery leakage and corrosion. To operate the remote
control correctly, follow the instructions below:
• Do not insert batteries into the remote control in the wrong direction.
• Do not charge, heat, open or short -circuit batteries.
• Do not throw batteries into a fire.
• Do not leave dead or exhausted batteries in the remote control.
• Do not use different types of batteries together or mix old and new batteries.
• If you do not use the remote control for a long period of time, remove the batteries to avoid possible
damage from battery corrosion.
• If the remote control does not function correctly or the operating range becomes reduced, replace
all batteries with new one.
• If battery leakage occurs, wipe the battery liquid from the battery compartment, and then insert new
batteries.
• The batteries can be used for one year in normal condition
Operation of the Remote Control
Distance: within 7m from the front of the remote control sensor.
Angle: within 30° each direction of the front of the remote sensor.
Notes on the remote control:
• Do not drop or give the remote control a shock.
• Do not put heavy object on the top of the remote control.
• Do not spill water or and liquid on the remote control.
• Do not open the remote control.
12