System design
Two-way ported speaker, with 2.2 litres internal volume. The cabinet is
solidly constructed from cast and extruded aluminium.
Drive unit
85mm cone bass/mid-range unit. The drive unit is designed to provide
exceptional clarity, transparency, dynamics and power-handling.
25mm neodymium aluminium-domed tweeter, semi horn-loaded for
improved dispersion characteristics.
Both drive units are magnetically shielded.
Frequency range
70Hz to 20kHz
Impedance
4Ω nominal
Sensitivity
85dB/watt, measured at 1m
Crossover
High-performance 6 element design 2.5kHz, 12dB/octave
Connections
4mm binding posts on the rear
Amplifier
100 watt/8Ω under normal operating conditions for a satellite system
30 watt/8Ω under normal operating conditions for a full-range system
Finish
Silver or Black paint finish
Dimensions
120 x 140 x 230mm (W x D x H)
Mass
Net 2.86kg per unit
Note that all specification values are typical, unless otherwise stated.
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and specifications are
subject to change without notice.
E-7
specification