Ise Temperature Display And Calibration - Thermo Scientific Orion Star Mode D'emploi

ISE Technique
SE Temperature Display and Calibration
SE Temperature Display
Star Plus meters allow the temperature to be viewed on individual measurement
lines in addition to the temperature display on the top, left of the screen .
To view the temperature for the ISE measurement line:
1 . Press and hold
2 . Press to choose the top display line . The arrow icon will point to the
selected line .
3 . Press /
be changed to display pH (pH), millivolts (mV), relative millivolts (RmV),
concentration (ISE), temperature (no icon) or a blank line .
SE Temperature Calibration
The temperature calibration mode of the Star Plus meter allows the temperature on
each measurement line to be manually adjusted .
To calibrate the temperature for the ISE measurement line:
1 . In the measurement mode, press
press /
2 . Press to begin the calibration .
3 . When the reading stabilizes, the arrow icon and the first digit will flash . Enter
the temperature by pressing
the next digit .
4 . Press to save and end the calibration .
EN-46
until the meter displays the measurement mode .
to change the value on the selected line . The top line can
until the temperature is shown for the selected line .
Thermo Scientific Orion Star
to choose the top measurement line and
/ to adjust each digit and
and Star Plus Series Meter User Guide
™
to move to