Function Buttons; Display Functions - Klarfit Pacemaker FX5 Mode D'emploi

MODE/MODUS:
Up:
Down:
START/STOP:
TIME
SPEED
DISTANCE
CALORIES
PULSE
Power on:
• Connect adaptor to theTreadmill , plus in and ensure the power is 220—240v.
• Check if the"safety key" is put on right position ofthe console.
Quick training:
• User can start the training by pressing the quick button of speed and incline.
• Speed from 2km/hr to 12 hr, 6 quick buttons for choice.
• Power incline from 2% to 12%, also 6 quick button for choice.
• After select the speed and incline , press „START" may start to jogging.
• Press "STOP"or pull out the „safety" key to stop the training.
15

Function Buttons

To confirm all settings and to enter into exercise mode.
To select training mode and adjust function value up.
To select training mode and adjust function value down.
To start or stop training.

Display Functions

Count up — No preset target,TIME will count up from 00:00 to maximum 99:00.
with each increment is 1 minutes..
Count down - If training with presetTime, Time will count down from preset Va-
lue. Each preset increment or decrement is 1 minute between 30:00 to 99:00
minutes.
Display current training speed from 1.0 to maximum 12.00 km/hr.
Count up - No preset target, Distance will count up from 0.00 to maximum
99.50km with each Increment 0.1 KM.
Count down — If training with preset target, Distance will count down from pre-
set to 1.00. Each preset increment or decrement is 0.5 KM (or ML) between 0.00
to 99.50.
Count up - No preset target, Calories will count up from O to maximum 995 with
each 1 cal increment.
Count down - If training with preset target, Calories will count down from preset
time to 0. Each preset increment or decrement is 5 cal from 50 to 990 cal.
The computer is with hand—on pulse, can detect pulse signal from handgrip
while user hold the senor tight.
HEART SYMBOL: When monitor receive heart rate signal, the symbol will blinking.
Operation