Defrost Function; Reheat Function - Redmond RT-407-E Manuel D'utilisation

6. REHEAT position of browning level controller
7. DEFROST position of browning level controller
8. CANCEL position of browning level controller
9. Toast loading lever
10. Power cord
I. BEFORE USING THE APPLIANCE
Carefully remove the appliance and its accessories from the packaging. Dispose of all
packaging materials and promotional stickers.
Keep all warning labels, warning stickers (if any), and serial number identification label
located on the housing. The absence of the serial number will deprive you of your
warranty benefits!
After transporting or storing at low temperatures allow the appliance to stay at room
temperature for at least 2 hours before using.
Wipe the unit with a moist cloth and let it dry.
It is recommended to warm the toaster during the first use, using maximum roasting
degree ("7"), without loading the bread slices into the toaster.
II. OPERATION
Bread slices should freely fit in toaster slots.
Different types of bread require different roasting degrees from "1" to "7". Upon the first
roasting of bread slices use neutral roasting degree "3" or "4".
Toast roasting
1. Plug in the appliance. Put bread slices into the toaster.
2. Adjust the desired roasting degree using browning level controller.
3. Smoothly until tight press the toast lever, toasts will be lowered, the red LED
indicator will light up solid and the roasting will start.
4. To interrupt the process set the browning level controller to the CANCEL position
until it clicks.
5. The LED indication will go out at the end of the process and toasts will auto-
matically rise.
6. Carefully remove the toasts (they are hot!) from the toaster.

Defrost function

Frozen bread can be currently used for toasts. Firstly toaster defrosts bread slices, and
then automatically switches to roasting mode.
1. Plug in the appliance. Put the frozen bread slices into the toaster.
2. Set the browning level controller to the DEFROST position.
3. Smoothly until tight press the toast lever, toasts will be lowered, the red LED
indicator will light up solid and the defrosting will start.
4. To interrupt the process set the browning level controller to the CANCEL position
until it clicks.
5. The LED indication will go out at the end of the process and toasts will auto-
matically rise.
6. Carefully remove the toasts (they are hot!) from the toaster.

Reheat function

This function allows warming up toasts that are already cooled down.
1. Plug in the appliance. Put the frozen bread slices into the toaster.
2. Set the browning level controller to the REHEAT position.
3. Smoothly until tight press the toast lever, toasts will be lowered, the red LED
indicator will light up solid and the heating will start.
4. To interrupt the process set the browning level controller to the CANCEL position
until it clicks.
5. The LED indication will go out at the end of the process and toasts will auto-
matically rise.
6. Carefully remove the toasts (they are hot!) from the toaster.
One-sided roasting (BAGEL)
Now bread slices can be roasted only from one side that allows to make wonderful
sandwiches.
1. Plug in the appliance. Put bread slices into the toaster.
2. Adjust the desired roasting degree using browning level controller.
3. Smoothly until tight press the toast lever, toasts will be lowered, the red LED
indicator will light up solid and the roasting will start.
4. Press the BAGEL button. The indicator will change from red colour to blue. One-
sided toasting will be enabled.
5. To interrupt the process set the browning level controller to the CANCEL position
until it clicks.
RT-407-E
GBR
7